# Data Center Liquid Cooling Market to Reach USD 23.24 Billion by 2035 | Technologies Compete to Support Gigawatt Scale AI Data Center Campuses | DataM Intelligence

- Link: https://www.thailand-business-news.com/pr-news/data-center-liquid-cooling-market-to-reach-usd-23-24-billion-by-2035-technologies-compete-to-support-gigawatt-scale-ai-data-center-campuses-datam-intelligence
- Published: 2026-08-07T20:27:00+07:00
- Author: MarketersMEDIA Newswire

_AI is rewriting the data center cooling playbook. As rack densities surge toward
unprecedented levels, liquid cooling is becoming critical to performance, efficiency,
and scalability. This explores the technologies, investments, and strategic opportunities
powering the next generation of AI infrastructure._

Leander, Texas, United States, August 7, 2026 /MarketersMEDIA/ — **AI Rack Density
Makes Cooling Architecture a Strategic Infrastructure Decision**

Artificial intelligence infrastructure is moving rapidly toward larger campuses,
denser GPU clusters, and more demanding thermal loads. The shift is changing cooling
from a facility support function into a central design decision that influences 
compute performance, power efficiency, water use and deployment speed. According
to **DataM Intelligence**, the **[Data Center Liquid Cooling Market](https://www.datamintelligence.com/research-report/data-center-liquid-cooling-market)
is estimated at USD 3.39 billion in 2025 and is projected to reach USD 23.24 billion
by 2035, growing at a CAGR of 21.21% from 2026 to 2035.** **North America **held
about **35.6% of the market**, while direct-to-chip cooling represented about 42.9%
of technology demand.

The scale of the thermal challenge is increasing as AI racks move beyond the limits
of conventional air cooling. Rack power densities above 30 kW to 100 kW are making
air-based systems less practical for modern AI workloads. NVIDIA reference architecture
for Rubin systems shows rack power near 225 kW, while power suppliers are developing
architectures for 1 MW racks and larger configurations. At campus scale, thousands
of racks can create a concentrated heat rejection requirement that must be planned
alongside substations, backup power, and water infrastructure.

This transition is creating a competitive market across direct-to-chip cooling, 
single-phase immersion, rear door heat exchangers, and spray or jet cooling. Each
technology serves a different stage of the deployment curve. Direct-to-chip systems
offer a practical route for new AI halls and phased retrofits. Rear door heat exchangers
can extend the useful life of air-cooled facilities. Immersion cooling can support
very high-density environments where operators can redesign server service models.
Spray and jet approaches are emerging for localized hot spot management and future
chip packages.

**Request Executive Sample Intelligence: [https://www.datamintelligence.com/download-sample/data-center-liquid-cooling-market](https://www.datamintelligence.com/download-sample/data-center-liquid-cooling-market)**

**Gigawatt Scale Campuses Expand the Cooling Opportunity Beyond Cold Plates**

The move toward gigawatt-scale AI campuses broadens the addressable market well 
beyond cold plates and coolant distribution units. A campus that supports several
hundred megawatts of IT load requires a coordinated thermal system covering rack
loops, facility water loops, heat exchangers and heat rejection equipment. The design
must also include pumps, valves, manifolds, sensors and leak detection systems that
can operate across thousands of nodes with consistent reliability.

DataM Intelligence estimates that solutions account for about **74.5% of market 
revenue**, reflecting demand for integrated systems rather than individual components.
Hyperscale facilities represent about **38.9% **of revenue, and AI or machine learning
workloads account for about **34.8% **of demand. Less than **30% **of global data
centers currently use liquid cooling, which leaves substantial conversion potential
as new server platforms make liquid readiness a standard procurement requirement.

The largest near-term opportunity is likely to sit in direct-to-chip systems because
they can remove heat at the processor while preserving familiar rack layouts and
service practices. Cold plates, coolant distribution units, and warm water loops
can also reduce dependence on mechanical chillers in suitable climates. Research
published in 2026 showed that optimized cold plate channel designs reduced maximum
chip temperature by more than 35 degrees Celsius compared with a baseline design,
demonstrating how material engineering and fluid path optimization can improve thermal
performance.

[Immersion cooling](https://www.datamintelligence.com/research-report/immersion-cooling-market)
is gaining attention for dense AI and high-performance computing environments because
it surrounds electronic components with dielectric fluid. The model can reduce fan
energy and enable compact server configurations. Adoption still depends on server
warranties, maintenance workflows, fluid compatibility, and standardization. Rear
door heat exchangers remain important for operators that need a transitional architecture,
while hybrid air and liquid systems can support mixed halls with legacy servers 
and new GPU racks.

**Power, Water and Heat Reuse Shape Regional Cooling Investment Strategies**

Cooling technology selection is increasingly shaped by local constraints. In the
[United States, data centers](https://www.datamintelligence.com/research-report/us-data-center-power-market)
are expected to account for about half of electricity demand growth through 2030,
according to the International Energy Agency. Large campuses are being planned in
regions with grid access, land and gas infrastructure, yet water availability and
interconnection delays are influencing facility design. Closed-loop liquid systems,
dry coolers and warm water operation can reduce water dependence and support faster
permitting in constrained markets.

Europe is placing greater emphasis on energy efficiency, heat recovery and urban
integration. Liquid cooling can produce higher quality waste heat than conventional
air systems, improving the economics of district heating and industrial heat reuse
where local networks exist. The opportunity extends to heat pumps, thermal storage
and digital control platforms that match cooling output with external heat demand.
Operators that can monetize recovered heat may improve both sustainability performance
and site economics.

**Cooling Suppliers Compete Across Hardware, Fluids and Digital Operations**

The competitive landscape is expanding across several layers of the cooling value
chain. Cold plate and CDU manufacturers are competing on thermal resistance, flow
control and serviceability. Fluid suppliers are developing dielectric liquids, corrosion
protection packages and long-life coolant formulations. Pump and valve suppliers
are adapting products for higher reliability and lower leakage risk. Digital platforms
are becoming important because gigawatt campuses require continuous monitoring of
temperature, pressure, flow and coolant quality.

Digital twins and adaptive control can create another efficiency layer. A 2026 study
based on the Frontier exascale supercomputer found that coordinated optimization
of flow rate and supply temperature could deliver energy savings of about **27.8%**
under practical operating constraints. This suggests that the future cooling market
will include software that optimizes thermal systems across changing AI workloads,
rather than relying on static operating settings.

**Investment Outlook Across the AI Cooling Value Chain Unlocks Multi-Billion-Dollar
Growth**

The next investment cycle will be shaped by the need to support compute at campus
scale. Direct-to-chip systems are likely to lead near-term deployments because they
align with current server roadmaps. Immersion cooling can gain share in specialized
high-density facilities. Rear door systems can support retrofit demand. Spray and
jet cooling can become more relevant as chip-level heat flux increases and packaging
architectures become more complex.

Global data center electricity consumption is projected by the International Energy
Agency to reach about 945 TWh by 2030, more than double the 2024 level. Cooling 
and other infrastructure account for a meaningful share of the increase. As AI-focused
capacity expands, thermal efficiency will influence how much revenue a campus can
generate from a fixed power connection. This changes cooling economics because better
heat removal can support higher compute density, lower auxiliary power, and more
stable accelerator performance.

**Campus Scale Procurement Favors Standardized and Serviceable Cooling Platforms**

Procurement decisions are shifting toward modular platforms that can scale from 
the rack to the campus. Buyers are evaluating cooling capacity per rack, facility
water temperature, redundancy and maintenance access. They are also examining whether
components can be sourced across regions and whether service teams can support rapid
commissioning. Standardized connectors, validated fluids and interoperable controls
can reduce integration risk across server generations.

Reliability data will become a larger part of vendor selection. Operators will expect
evidence covering leak performance, coolant stability, pump life and thermal cycling.
They will also require clear responsibility across the server manufacturer, cooling
integrator and facility operator. Suppliers that provide commissioning support and
long-term monitoring can gain an advantage because cooling failures can affect expensive
GPU capacity and service level commitments.

Contact Info: 
Name: Fabian MathewsEmail: [Send Email](https://send.releasecontact.com/89200043)
Organization: DataM Intelligence 4Market Research LLPAddress: 2243 Rocoso TRL, Leander
TX 78641Phone: +1 877 441 4866Website: [https://www.datamintelligence.com/](https://www.datamintelligence.com/)

Release ID: 89200043

Should you come across any errors, concerns, or inconsistencies within this press
release’s content, we urge you to reach out without delay by contacting [error@releasecontact.com](https://www.thailand-business-news.com/pr-news/error@releasecontact.com)(
it is important to note that this email is the authorized channel for such matters,
sending multiple emails to multiple addresses does not necessarily help expedite
your request). Our committed team will promptly address your feedback within 8 hours
and take appropriate measures to resolve any identified issues or guide you through
the removal process. Providing accurate and dependable information remains our utmost
priority.

**Source** : [Data Center Liquid Cooling Market to Reach USD 23.24 Billion by 2035 | Technologies Compete to Support Gigawatt Scale AI Data Center Campuses | DataM Intelligence](https://news.marketersmedia.com/data-center-liquid-cooling-market-to-reach-usd-2324-billion-by-2035-or-technologies-compete-to-support-gigawatt-scale-ai-data-center-campuses-or-datam-intelligence/89200043?rand=206000)

    ```wp-block-verse
    The information provided in this article was created by MarketersMEDIA Newswire, our news partner. The author's opinions and the content shared on this page are their own and may not necessarily represent the perspectives of Thailand Business News.
    ```
