# DH-Robotics Debuts 13-DOF Direct-Drive Dexterous Hand at IROS 2026

- Link: https://www.thailand-business-news.com/pr-news/dh-robotics-debuts-13-dof-direct-drive-dexterous-hand-at-iros-2026
- Published: 2026-09-30T21:39:00+07:00
- Author: PR Newswire

_ADH-5-13 joins the deployment-focused UDH-3-7 and a portfolio of two-, three- and
five-finger robotic end effectors_

PITTSBURGH, Sept. 30, 2026 /PRNewswire/ — DH-Robotics today debuted the ADH-5-13,
a five-finger dexterous hand with 13 independently controllable active degrees of
freedom (DOF), at IROS 2026 in Pittsburgh. The company also demonstrated the UDH-
3-7, its three-finger direct-drive dexterous hand, alongside a portfolio of two-,
three- and five-finger end effectors for a range of gripping and manipulation tasks.

[⌊DH-Robotics showcases its fully direct-driven ADH-5-13 five-finger and UDH-3-7
three-finger dexterous hands at IROS 2026 in Pittsburgh, marking the global debut
of the ADH-5-13.⌉⌊DH-Robotics showcases its fully direct-driven ADH-5-13 five-finger
and UDH-3-7 three-finger dexterous hands at IROS 2026 in Pittsburgh, marking the
global debut of the ADH-5-13.⌉[
DH-Robotics showcases its fully direct-driven ADH-
5-13 five-finger and UDH-3-7 three-finger dexterous hands at IROS 2026 in Pittsburgh,
marking the global debut of the ADH-5-13.

The debut reflects DH-Robotics’ "Dexterity as Productivity" approach: matching hand
architecture, sensing and control to the manipulation requirements of embodied AI
research, teleoperation and robotic systems.

**ADH-5-13: a five-finger platform for multi-finger manipulation**

The ADH-5-13 uses an anthropomorphic five-finger configuration with 13 active DOF.
The thumb, index finger and middle finger each have three DOF; the ring and little
fingers each have two. The index and middle fingers also provide ±15° of lateral
motion for a broader range of multi-finger poses.

At 735 g, the hand is designed to balance dexterity with system weight. DH-Robotics
specifies a maximum lifting payload of up to 20 kg once an object is grasped.

The ADH-5-13 integrates fingertip tactile sensing and can accommodate additional
sensing options, including electronic skin, six-axis force/torque sensors and vision-
based tactile sensors. Sensors and individual modules can be replaced without dismantling
the entire hand or a full finger, simplifying service and maintenance. According
to DH-Robotics, this serviceable design improves maintenance efficiency by 300%,
helping reduce downtime and operating and maintenance costs.

The hand’s fully direct-drive, backdrivable architecture provides independent control
of all 13 active DOF. Dual magnetic encoders at each joint provide position feedback,
and DH-Robotics specifies fingertip positioning repeatability of ±0.2 mm. The company
says the architecture supports hybrid force/position control and compliant contact
behavior in manipulation tasks.

**UDH-3-7: strength, flexibility and a compact three-finger form factor**

The UDH-3-7 is built around a streamlined three-finger configuration with seven 
active DOF. DH-Robotics specifies a maximum payload of 15 kg, maximum fingertip 
force of 50 N, positioning repeatability of ±0.02 mm and a design life of one million
cycles.

The hand also uses a direct-drive, backdrivable design. Its thumb supports a 180
° range of rotation and opposition, enabling different grasp configurations for 
objects with varied shapes and materials.

UDH-3-7 supports CAN FD, RS-485 and EtherCAT. Development tools support C++ and 
Python, while ROS 2 integration and workflows using Isaac and MuJoCo can help teams
evaluate and integrate the hand in embodied AI systems.

**A portfolio organized around the task**

DH-Robotics positions its two-, three- and five-finger end effectors around distinct
manipulation needs:

 ◦  **Two-finger end effectors: **general-purpose gripping and grasping.
 ◦  **Three-finger dexterous hands: **a balance of strength, dexterity and working
   space for manipulation.
 ◦  **Five-finger dexterous hands: **coordinated multi-finger manipulation and more
   complex dexterous tasks.

IROS attendees can see the portfolio at Booth #1008 through Sept. 30. The IROS 2026
conference runs Sept. 27–Oct. 1 in Pittsburgh.

**About DH-Robotics**

DH-Robotics develops robotic end effectors and precision motion-control components
for industrial automation and embodied AI. Its portfolio includes electric grippers,
dexterous hands, linear coil actuators, rotary grippers and servo electric cylinders.
Learn more: [https://en.dh-robotics.com/](https://en.dh-robotics.com/).

---

  |  This article was produced by Cision PR Newswire, our trusted news partner. The views expressed and the content presented here are solely those of the author and may not fully reflect the opinions of Thailand Business News. |

---

 
**Read the original article :** [DH-Robotics Debuts 13-DOF Direct-Drive Dexterous Hand at IROS 2026 ](http://www.prnasia.com/story/archive/5060614_CN60614_0?rand=184833)
