# DTC2026 | World's First Mass Production of Ultrahigh-Mobility Oxide Technology Paves the Way for a New Generation of Displays

- Link: https://www.thailand-business-news.com/pr-news/dtc2026-worlds-first-mass-production-of-ultrahigh-mobility-oxide-technology-paves-the-way-for-a-new-generation-of-displays
- Published: 2026-11-20T18:44:00+07:00
- Author: PR Newswire

|   |

SHENZHEN, China, Nov. 20, 2026 /PRNewswire/ — TCL CSOT became the world’s first 
to achieve mass production of ultrahigh-mobility oxide technology (**electron** **
mobility of ~50 cm² V⁻¹ s⁻¹**) on an 8.6-generation line. The major technical breakthrough
marks the first time high mobility oxide technology has gone beyond the 50 cm² V
⁻¹ s⁻¹ threshold in mass production, presenting exciting new possibilities in display
applications.

[⌊The world's first product made using an ultrahigh-mobility oxide backplane, the
18-inch NB High-Refresh Gaming Display⌉⌊The world's first product made using an 
ultrahigh-mobility oxide backplane, the 18-inch NB High-Refresh Gaming Display⌉[
The world’s
first product made using an ultrahigh-mobility oxide backplane, the 18-inch NB High-
Refresh Gaming Display

**| Keywords****:** Ultrahigh mobility, 50 cm² V⁻¹ s⁻¹, 8.6-generation mass production,
world’s first ultrahigh-mobility oxide product

**Beyond 50 cm² V⁻¹ s⁻¹: Premium Displays Without the Compromise**

For years, the production of high-end displays has involved a series of trade-offs:
high refresh rates versus lower power consumption, high resolution versus brightness,
and narrow bezels versus cost. The mass production of ultrahigh-mobility oxide technology
breaks this deadlock by enabling drive currents that surpass the critical threshold
needed to deliver these properties without such compromises.

**All-Round Excellence in Image Quality, Energy Efficiency, and Cost**

Traditionally, gains in image quality have come at the expense of power consumption.
However, the properties of ultrahigh-mobility oxide technology change this on several
fronts. Firstly, like all oxide TFTs, the technology offers extremely low off-state
current, enabling static images to be held at an ultra-low refresh rate, thereby
reducing refresh power consumption. Secondly, higher current drive allows GOA (gate
driver on array) and driver circuits to operate with lower voltage swings and shorter
charging times. Combined with optimization across the full signal chain, power consumption
is also reduced when displaying dynamic images. As a result, ultrahigh-mobility 
oxide technology allows for improvements in image quality without requiring extra
power.

By enabling displays to switch between ultra-low and ultra-high refresh rates in
the same panel, the technology also allows high-performance gaming and video applications
to exist alongside power-efficient office and reading in one device.

Shrinking the TFT also increases aperture ratio, enabling higher pixel density without
sacrificing brightness, so high-resolution screens no longer appear dim. Substantially
reduced edge routing greatly improves the screen-to-body ratio, making ultra-narrow
bezels a reality for mass-produced displays.

The real value of ultrahigh-mobility oxide technology is in turning what was once
a series of trade-offs into a best-of-all-worlds scenario that delivers premium 
display experiences. Leveraging the scale of TCL CSOT’s 8.6-generation production
line, these premium displays can now be widely adopted at an affordable cost.

At DTC 2026, TCL CSOT unveiled its own ultrahigh-mobility display technology, setting
a new standard for display excellence that will redefine the future for both consumer
and professional display applications.

**Technology Reimagined: A Seamless Loop from Process to Product**

Developing ultrahigh-mobility oxide technology is the result of significant engineering
achievements made by TCL CSOT and the team at the Institute of Science Tokyo’s MDX
Research Center for Element Strategy, led by Prof. Hideo Hosono. Together with Prof.
Hosono’s team, TCL CSOT has advanced the technology across three fronts—film deposition,
device design, and architecture—transforming isolated processes into manufacturable
products.

**Film Deposition: Ultra-Uniform Oxide Semiconductor System**

TCL CSOT has taken film deposition beyond conventional processes with the use of
continuous rotary-target sputtering and a composite stacked oxide layer design that
suppresses defects. A defect repair process further improves the interface, overcoming
the stability challenges associated with ultrahigh-mobility materials.

[⌊The new continuous oxide deposition process achieves three-layer film formation
in a single chamber⌉⌊The new continuous oxide deposition process achieves three-
layer film formation in a single chamber⌉[
The new continuous oxide deposition process
achieves three-layer film formation in a single chamber

**| Key Metrics****:** Film thickness uniformity U% < 5%, average mobility 51.6 
cm² V⁻¹ s⁻¹

**Device Core: Precise Control of the Hydrogen–Oxygen Balance in the Insulator**

Ultrahigh-mobility devices are highly sensitive to moisture, hydrogen, and oxygen,
and any deviation from the optimal hydrogen–oxygen ratio in the insulator can degrade
performance. To address this, TCL CSOT has developed a hydrogen–oxygen balance control
system for both the front- and back-channel insulators, providing threefold protection.

[⌊H/O Balance Control for Front- and Back-Channel Insulators: Low-Defect Interface
and High-Density Barrier⌉⌊H/O Balance Control for Front- and Back-Channel Insulators:
Low-Defect Interface and High-Density Barrier⌉[
H/O Balance Control for Front- and
Back-Channel Insulators: Low-Defect Interface and High-Density Barrier

**New Circuit Architecture Unlocks the Potential of Ultrahigh-Mobility Oxide**

Alongside its clear benefits, higher mobility also brings new challenges, including
weaker gate control, threshold-voltage drift, and increased self-heating. To address
these challenges, TCL CSOT has introduced a new GOA architecture alongside optimized
device design and improved thermal management to enable the full potential of ultrahigh-
mobility oxide to be realized.

**Redefining the Limits of LCD Technology**

The mass production of ultrahigh-mobility oxide technology gives LCD a major competitive
edge in applications such as high-refresh-rate notebooks and high-end monitors, 
enabling it to compete directly with OLED. Its inherent advantages—low cost, long
lifetimes, and no burn-in—combined with high image quality and low power consumption,
will offer users a wider choice of high-quality options at a lower price point compared
with OLED.

Meanwhile, ultrahigh-mobility oxide technology also shows strong potential in emerging
areas such as VR/AR, medical displays, and automotive displays, where its high refresh
rates can help reduce motion sickness, its high color fidelity meets high professional
requirements, and its high reliability supports use in diverse environments.

**From the Laboratory to the Production Line**

TCL CSOT has built extensive expertise in oxide technology over the years, progressing
from mass production of conventional IGZO in 2024 to 30 cm² V⁻¹ s⁻¹ high-mobility
oxide in 2025, and achieving mass production of ultrahigh-mobility oxide in 2026.
The latest breakthrough combines device stability comparable to conventional IGZO
with excellent voltage endurance and reliability, marking a major step from the 
laboratory to production and lays the foundations for future product iterations 
and scale expansion.

**About TCL CSOT**

Established in 2009, TCL China Star Optoelectronics Technology Co., Ltd. (TCL CSOT)
is a leading global innovator in display technologies. Its LCD, OLED, and MLED solutions
power applications across TVs, smartphones, tablets, laptops, monitors, automotive
systems, VR/XR, and commercial displays. With a clear strategic direction set by
its advanced display technology brand APEX, TCL CSOT invests continuously and strategically
in R&D, driven by a mission to amaze, protect and inspire all people through endlessly
innovative display technology. As part of TCL’s Worldwide Olympic Partnership, TCL
CSOT is proud to deliver display solutions that elevate experiences on the global
stage.

---

  |  This article was produced by Cision PR Newswire, our trusted news partner. The views expressed and the content presented here are solely those of the author and may not fully reflect the opinions of Thailand Business News. |

---

 
**Read the original article :** [DTC2026 | World's First Mass Production of Ultrahigh-Mobility Oxide Technology Paves the Way for a New Generation of Displays ](https://en.prnasia.com/story/archive/5103423_AE03423_0?rand=184833)
