# Nuvoton Introduces KA85010UA, Gen 6 26-Cell EIS-enabled Battery Monitoring IC

- Link: https://www.thailand-business-news.com/pr-news/nuvoton-introduces-ka85010ua-gen-6-26-cell-eis-enabled-battery-monitoring-ic
- Published: 2026-09-29T15:00:00+07:00
- Author: PR Newswire

KYOTO, Japan, Sept. 29, 2026 /PRNewswire/ — Nuvoton Technology Corporation Japan(
hereinafter "NTCJ") announced on September 29 that it will begin providing samples
of the KA85010UA, a 26-cell battery monitoring IC equipped with EIS functionality,
in January 2027.

The company’s proprietary inductor method reduces the PCB temperature rise during
EIS measurements by approximately 93% compared with conventional methods, enabling
battery degradation diagnosis, lifetime prediction, and early detection of signs
of cell abnormalities. NTCJ also supports integration into applications by providing
EIS analysis algorithms.

Key visual: [https://cdn.kyodonewsprwire.jp/prwfile/release/M108245/202609176157/_prw_PI1fl_nk51DWnH.png](https://cdn.kyodonewsprwire.jp/prwfile/release/M108245/202609176157/_prw_PI1fl_nk51DWnH.png)

Image: [https://cdn.kyodonewsprwire.jp/prwfile/release/M108245/202609176157/_prw_PI2fl_QiCl1nS4.png](https://cdn.kyodonewsprwire.jp/prwfile/release/M108245/202609176157/_prw_PI2fl_QiCl1nS4.png)

In addition to battery monitoring functions, this product integrates EIS-based impedance
measurement into a single chip. EIS is a technique that superimposes an AC current
on a battery and calculates impedance from the resulting voltage and current responses.
This makes it possible to perform EIS measurements within the system, without the
dedicated measurement equipment previously required, enabling continuous monitoring
and diagnosis of internal battery conditions.

By quantitatively assessing internal battery conditions that are difficult to determine
from conventional voltage, current, and temperature measurements alone, EIS can 
estimate SOH and internal temperature, predict battery lifetime, and provide early
detection of signs of cell abnormalities, contributing to improved battery safety
in vehicles and energy storage systems.

Figure1: [https://cdn.kyodonewsprwire.jp/prwfile/release/M108245/202609176157/_prw_PI3fl_ykSZBCV1.png](https://cdn.kyodonewsprwire.jp/prwfile/release/M108245/202609176157/_prw_PI3fl_ykSZBCV1.png)

This product uses the company’s proprietary inductor method instead of the conventional
resistor method, significantly reducing energy loss. Company evaluations confirmed
that both power loss and PCB temperature rise could be reduced by approximately 
93% compared with the conventional resistor method (Figures 2 and 3).

These low-power and low-heat characteristics facilitate implementation of EIS functionality
in automotive batteries and energy storage systems. They also enable stable acquisition
of EIS measurement data during operation, charging, and rest, contributing to advanced
battery condition monitoring and diagnostics.

Figure2: [https://cdn.kyodonewsprwire.jp/prwfile/release/M108245/202609176157/_prw_PI4fl_Dx245Ttn.png](https://cdn.kyodonewsprwire.jp/prwfile/release/M108245/202609176157/_prw_PI4fl_Dx245Ttn.png)

Figure3: [https://cdn.kyodonewsprwire.jp/prwfile/release/M108245/202609176157/_prw_PI5fl_Eq73rE80.png](https://cdn.kyodonewsprwire.jp/prwfile/release/M108245/202609176157/_prw_PI5fl_Eq73rE80.png)

Drawing on EIS data-analysis expertise gained through verification with automakers
and research institutions, NTCJ provides end-to-end support, from setting up the
EIS measurement environment to implementing estimation and abnormality-detection
functions and integrating them into applications (Figure 4).

This support allows even customers who are just beginning to use EIS functionality
to build battery diagnostic systems more easily and shorten development cycles.

Figure4: [https://cdn.kyodonewsprwire.jp/prwfile/release/M108245/202609176157/_prw_PI6fl_m1fCt0nW.png](https://cdn.kyodonewsprwire.jp/prwfile/release/M108245/202609176157/_prw_PI6fl_m1fCt0nW.png)

For more information about the product, please visit: [https://nuvoton.co.jp/semi-spt/apl/rd/?id=1100-0446](https://nuvoton.co.jp/semi-spt/apl/rd/?id=1100-0446)

Official website: [https://www.nuvoton.co.jp/en/](https://www.nuvoton.co.jp/en/)

---

  |  This article was produced by Cision PR Newswire, our trusted news partner. The views expressed and the content presented here are solely those of the author and may not fully reflect the opinions of Thailand Business News. |

---

 
**Read the original article :** [Nuvoton Introduces KA85010UA, Gen 6 26-Cell EIS-enabled Battery Monitoring IC ](http://www.prnasia.com/story/archive/5058874_AE58874_0?rand=184833)
