# RoboParty Unveils RP1, a High-Performance Full-Stack Open-Source Humanoid Robot at IROS

- Link: https://www.thailand-business-news.com/pr-news/roboparty-unveils-rp1-a-high-performance-full-stack-open-source-humanoid-robot-at-iros-2
- Published: 2026-10-03T23:56:00+07:00
- Author: PR Newswire

_From RPO and Romomo to PartyOS, RoboParty is building an open humanoid robotics
foundation for developers worldwide._

PITTSBURGH, Oct. 4, 2026 /PRNewswire/ — On September 28, 2026, RoboParty publicly
unveiled RP1 (ROBOTO 01) at IROS 2026, marking the robot’s global debut.

In January 2026, RoboParty fully open-sourced RPO (ROBOTO ORIGIN), its first open-
source humanoid robotics project. To date, RPO has received more than 2,500 GitHub
stars. As a developer-oriented open-source humanoid robot, RPO has attracted broad
attention worldwide and inspired multiple community builds and reproductions.

[⌊（RoboParty’s RP1 humanoid robot on display at IROS 2026）⌉⌊（RoboParty’s RP1 
humanoid robot on display at IROS 2026）⌉[
（RoboParty’s RP1 humanoid robot on display
at IROS 2026）

Building on this foundation, RoboParty positions RP1 as the world’s first high-performance
full-stack open-source bipedal humanoid robot. RP1 is designed for researchers, 
educators, robotics developers and embodied AI teams, with the goal of providing
a humanoid robotics system that can be used, modified, trained and continuously 
extended in real development workflows.

**Kick Me: Putting Dynamic Stability to the Test**

At RoboParty’s IROS booth, the "Kick Me" interactive demonstration was one of the
most direct ways for visitors to experience RP1’s capabilities.

During the demonstration, visitors could directly apply external disturbances to
the robot. When pushed or kicked, RP1 rapidly adjusted its posture and recovered
its balance. Unlike demonstrations based only on predefined motions, this open interaction
allowed visitors to observe the robot’s dynamic stability and control performance
under external disturbances.

The repeated high-intensity interactions also provided a direct test of the robot’s
body performance and system-level robustness.

RP1’s dynamic motion and disturbance-recovery capabilities at IROS were supported
by PartyOS, RoboParty’s open R&D foundation for humanoid robotics, which integrates
the UFO framework.

UFO — short for "A General Unsupervised Reinforcement Learning Framework for Humanoid
Control" — is a training framework for discovering humanoid motor skills through
unsupervised reinforcement learning. It trains low-level motion policies that allow
robots to learn dynamic behaviors without relying entirely on conventional predefined
motion trajectories, including skill transitions, disturbance recovery and fall 
recovery.

Rather than treating motion control as an isolated algorithmic module, RoboParty
is integrating the robot body, actuator modules, low-level control and embodied 
AI algorithms into one system for continuous joint validation. The goal is to ensure
that algorithmic capabilities are built on a stable and reproducible humanoid robotics
platform.

The IROS demonstration marked an important validation milestone for this technical
direction.

Throughout the exhibition, researchers, university faculty and students, robotics
developers and industry professionals from different countries and regions visited
RoboParty’s booth. Discussions extended beyond motion performance to RP1’s robot
body, Romomo actuator modules, motion control, modular design and future open-source
plans.

Multiple research teams and developers also discussed the procurement of robots 
and core components, algorithm reproduction, embodied AI research and open-source
collaboration with the RoboParty team.

**From Closed Systems to Full-Stack Open Source**

With RP1, RoboParty is exploring an alternative path for humanoid robotics.

Today, high-performance humanoid robots are typically delivered as complete products
or closed systems. Researchers and developers may be able to use or observe these
robots, but the underlying hardware, motion-control systems, simulation environments
and software stacks are often difficult to inspect, modify, reproduce or extend.

RP1 is designed to redefine how humanoid robots are developed — from a developer’s
perspective.

For RoboParty, "full-stack open source" does not mean releasing only mechanical 
files or a single software module. In addition to the robot body and core actuator
modules, RoboParty plans to progressively open its motion-control systems, simulation
environments, SDKs, training tools and PartyOS development foundation.

This will allow developers to participate more deeply in humanoid robotics development,
from hardware and low-level control to model training and deployment.

"Humanoid robots should not be closed systems that only a small number of teams 
can build while everyone else can do little more than watch," said Yi Huang, founder
of RoboParty. "We want RP1 to become an open foundation that developers can access,
modify, train and continuously improve. Full-stack open source has been our technical
direction since the RPO project."

RoboParty plans to announce further details of RP1’s open-source roadmap in October
2026, with broader software and hardware releases and a mass-production program 
to follow later in Q4.

**RP1: A High-Performance Open-Source Body for Embodied AI**

RP1 is designed to provide a high-performance humanoid platform for dynamic motion,
embodied AI model training, validation and deployment, data collection and continuous
development.

RP1 delivers peak joint torque of up to 160 N•m. From its in-house-developed Romomo
actuator modules and mechanical structure to its real-time motion-control system,
RP1 is designed around the requirements of dynamic motion, disturbance recovery 
and long-term development experiments.

These capabilities were demonstrated live at IROS. During the "Kick Me" interaction,
visitors directly applied external disturbances while RP1 adjusted its posture and
regained its balance. The robot also demonstrated continuous motion, disturbance
recovery and fall recovery. These behaviors reflected not only algorithmic performance
but also the coordination of the robot body, actuator modules and motion-control
system.

RP1 builds on RoboParty’s broader full-stack open-source roadmap.

RoboParty began with RPO, its fully open-source bipedal humanoid robotics project.
Through the development and community adoption of RPO, RoboParty expanded its technical
capabilities to cover core actuators, robot bodies, motion control, dexterous manipulation
and robotics software systems.

RoboParty subsequently introduced the Romomo actuator modules and its dexterous 
RP Hand while continuing to build PartyOS.

RPO validated an open-source bipedal robot body, motion-control system and developer
workflow. Romomo expanded the technical foundation to cover core actuator modules.
RP Hand extended the stack into dexterous manipulation and human-robot interaction.
RP1 now brings these capabilities together into a humanoid robotics system designed
for research and development.

Based on these capabilities, PartyOS is evolving across humanoid locomotion, perceptual
interaction, whole-body manipulation and autonomous intelligent humanoids.

By bringing the robot body, actuators, motion control, perception, manipulation 
and intelligent software into one coordinated development system, RoboParty is building
a full-stack open-source humanoid robotics platform from low-level hardware to high-
level intelligence.

**Building a Global Developer Community**

RoboParty’s team spans robot hardware, motion control, artificial intelligence, 
systems software and manufacturing engineering. Core team members studied at Tsinghua
University’s Yao Class, Peking University’s Zhi Class, Harbin Institute of Technology,
Stanford University, Carnegie Mellon University, Zhejiang University and other leading
institutions.

RoboParty has already built a global community of more than 5,000 developers across
research, education and maker communities.

As RP1 becomes progressively more open, RoboParty aims to further develop this community
into an open ecosystem spanning robot hardware, algorithms, data and applications,
enabling more researchers, model-development teams and developers to participate
in building and advancing humanoid robotics.

Media Contact: [marketing@roboparty.com](https://www.thailand-business-news.com/pr-news/marketing@roboparty.com)

GitHub: [https://github.com/Roboparty/roboto_origin](https://link.wtturl.cn/?target=https%3A%2F%2Fgithub.com%2FRoboparty%2Froboto_origin&scene=im&aid=582478&lang=zh)

Website: [https://roboparty.com/](https://link.wtturl.cn/?target=https%3A%2F%2Froboparty.com%2F&scene=im&aid=582478&lang=zh)

---

  |  This article was produced by Cision PR Newswire, our trusted news partner. The views expressed and the content presented here are solely those of the author and may not fully reflect the opinions of Thailand Business News. |

---

 
**Read the original article :** [RoboParty Unveils RP1, a High-Performance Full-Stack Open-Source Humanoid Robot at IROS ](http://www.prnasia.com/story/archive/5063155_AE63155_0?rand=184833)
